To clean your mobile phone and its accessories safely, switch them off, unplug them and wipe them with a soft, lint-free cloth, using as little moisture as possible. Keep liquid out of openings, follow the manufacturer's cleaning instructions and reconnect devices only when they're completely dry.
What you need to clean your phone and accessories
Check the cleaning instructions for your phone and accessories, especially before using a disinfectant. A product suitable for your phone's glass back may not suit its screen coating, leather cover or earbud mesh.
Keep these basic supplies ready:
- A clean microfibre cloth for screens and smooth surfaces.
- A second dry, lint-free cloth for removing moisture.
- A soft, clean brush for loose dust around external openings.
- Clean water for lightly dampening a cloth where permitted.
- A manufacturer-approved cleaning or disinfecting wipe, if needed.
Unplug chargers from the wall socket, disconnect cables and remove your phone cover. Switch off your phone and any accessories that have a power button. Let devices cool before cleaning them.
Never spray cleaner directly onto a phone or accessory. Avoid window cleaner, bleach, abrasive powders, acetone and household cleaning mixtures unless the device's instructions specifically allow a particular product. Kitchen paper and rough cloths can also scratch delicate finishes, particularly if they trap grit.
How to clean your phone screen and body
Brush away visible grit before wiping so that you don't drag it across the glass. Then gently wipe the screen, back and frame with a dry microfibre cloth, moving to a clean part of the cloth as it picks up fingerprints.
For stubborn marks, lightly dampen one corner of the cloth with water, provided your phone's instructions permit it. The cloth should feel barely damp and shouldn't release droplets when squeezed. Wipe the surface, then use the dry cloth to remove any remaining moisture.
Use light pressure around camera lenses, raised camera rings and screen edges. Don't scrub a scratch or chipped area, and don't let liquid collect around buttons or under a screen protector that's lifting at the edges. If the display or back is cracked, avoid damp cleaning near the damage and have a technician assess it for repair.
Cleaning and disinfecting serve different purposes: cleaning removes dirt and many germs, while disinfecting uses chemicals to kill remaining germs, as explained by the Centers for Disease Control and Prevention. You don't need a disinfectant for every routine clean.
If you need to disinfect your phone, use only an approved disinfectant for your exact device. Some manufacturers allow certain alcohol wipes on hard external surfaces, but that doesn't mean you can use any alcohol solution. Follow both the device instructions and the wipe's directions for how long the surface needs to stay wet. If they conflict, choose another approved method rather than soaking your phone.
How to clean charging ports and speaker openings
Check openings under a bright light. For loose dust at the surface, hold the opening facing downwards and gently brush across its outside edge with a dry, soft brush. Don't push the bristles into the port or mesh.
Keep tools out of ports: pins, SIM ejector tools, toothpicks and cotton buds can bend contacts, leave fibres behind or push debris further inside. Avoid compressed air and don't blow into an opening with your mouth, as this can introduce moisture.
If packed lint prevents the charging plug from fitting properly, or sound remains muffled after you clean the outside, seek help from an authorised service centre. Stop charging if you see corrosion or receive a moisture warning. Don't rinse your phone just because it's water-resistant. Water resistance can weaken with wear or damage.
How to clean your phone cover
Clean the cover separately and let it dry fully before refitting it. Wipe dust from your phone's back and the inside of the cover, as trapped particles can rub against the finish.
- Silicone and plain plastic: If the manufacturer permits washing, use mild soap and water, rinse thoroughly and air-dry. You may need a different method for covers with glued decorations or built-in electronics.
- Leather and synthetic leather: Use a soft, dry cloth first. Apply only a cleaner approved for that material; soaking and alcohol can discolour or damage the finish.
- Fabric covers: Follow the care label. Gently spot-clean only where permitted, and don't assume you can machine-wash the cover.
Don't try to remove yellowing, peeling patches or deep stains with stronger chemicals. You may remove surface dirt, but you can't reliably reverse material ageing through cleaning.
How to clean earbuds and headphones
Disconnect wired earphones and switch off wireless models where possible. Wipe their outer surfaces with a dry cloth, using a barely damp cloth only where the instructions allow it. Keep moisture away from speaker mesh, microphones and charging contacts.
Remove silicone ear tips only if they're designed to detach. Wash them separately with mild soap and water if permitted, then let them dry completely before reattaching them. Check the care instructions for foam tips rather than assuming you can wash them.
Hold earbuds with the mesh facing downwards and gently brush away loose surface debris without pressing it through the mesh. Clean the charging case with a dry, lint-free cloth; avoid scraping its contacts. For headphones, clean the headband and cushions as their material requires, and never soak cushions containing foam or electronics.
How to clean chargers, cables and power banks
Unplug everything, then wipe charger bodies, cable insulation and power bank casings with a dry cloth. If the instructions allow a damp cloth on the casing, keep it away from plug pins, connectors, sockets and seams. Don't immerse any part in water.
Inspect cables as you clean them. Replace cables with exposed wires, split insulation or heat damage rather than covering the damage with tape. Stop using a power bank that's swollen, leaking or unusually hot, and ask the manufacturer how to dispose of it safely.
Reconnect only when fully dry, checking recesses and connectors for moisture too. Don't speed up drying with a hair dryer or heater. Clean visible dirt promptly, wipe frequently touched surfaces regularly and wash your cleaning cloth so that you don't transfer grit back onto your devices.